in recent years, the application of composite materials in aircraft and space vehicle structural components has become increasingly popular. preventing failure of composite structural systems has been an important issue in engineering design. due to the lack of through-the-thickness reinforcement, structures made from laminated composite materials and adhesively bonded joints are highly suscept...

Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...

fracture of mixed mode i/ii in beech wood and its wood polymers has been investigated experimentally in this study. hence, two crack systems of tl and rl were selected in which the crack planes extend along the wood fibers. this investigation has demonstrated that onset of mixed mode cracking can be predicted with a very simple fracture criterion in these crack systems. results indicated that f...

In this paper a new method to determine the fracture properties and strain energy release rate for Carbon- Polyester composite has been introduced.  Fracture characteristics such as critical stress intensity factor and critical strain energy release rate for mode I, mode II and mixed mode loading were determined using Arcan type specimen. 130 layers of carbon fiber polyester woven composite wit...

this article aims to review various modes of fracture toughness of resin composites. also, this study intends to review the papers on the fracture mode, namely “fractography”, under scanning electron microscopy finding fracture initiation site, and the effect of filler content on the fracture toughness of resin composites. it will also review the effect of aging on the fracture toughness of res...

The fracture mechanics examines the development and expansion of cracks in solids and how they affect the deformation of materials. The stress intensity factors at the tip of the crack and the critical stress intensity factors or fracture toughness of materials are considered in the relevant criteria. There are three main modes of applying forces to a crack including the tensile mode, shear mod...

An experimental evaluation of mixed mode fracture tests conducted on adhesively bonded wood specimens using a dual actuator load frame is presented. This unit allows the fracture mode mixity to be easily varied during testing of a given specimen, providing improved consistency, accuracy, and ease of testing over a range of loading modes. Double cantilever beam (DCB) type specimens made of south...

Three-dimensional enriched finite elements are used to compute mixed-mode stress intensity factors (SIFs) for three-dimensional cracks in elastic functionally graded materials (FGMs) that are subject to general mixed-mode loading. The method, which advantageously does not require special mesh configuration/modifications and post-processing of finite element results, is an enhancement of previou...

A mode-dependent embedded-process-zone (EPZ) model has been developed and used to simulate the mixed-mode fracture of plastically deforming adhesive joints. Mode-I and mode-II fracture parameters obtained from previous work have been combined with a mixed-mode failure criterion to provide quantitative predictions of the deformation and fracture of mixed-mode geometries. These numerical calculat...

In this paper, the interface crack of two non-homogenous functionally graded materials is studied. Subsequently, with employing the displacement method for fracture of mixed-mode stress intensity factors, the continuous variation of material properties are calculated. In this investigation, the displacements are derived with employing of the functional graded material programming and analysis o...